New Hampshire Air Brakes Practice Test

Required if the vehicle you'll drive has air brakes — which in practice means nearly every combination vehicle and most straight trucks. The test covers the parts of an air-brake system (compressor, governor, tanks, valves), the specific pressures where things happen (cut-in, cut-out, low-air warning, spring-brake pop-out), and the inspection sequence for leaks and warning devices. Fail this knowledge test or take the skills test in a vehicle without air brakes, and your license carries an air-brake restriction that keeps you out of most trucking jobs.

Who needs it: Anyone who'll drive a vehicle with air brakes. Skipping it puts an L or Z restriction on the license.

Sample practice questions

On a long downgrade, the brakes should be used:

Answer: Only as a supplement to engine braking, with the vehicle in a low gear — Get into a low gear first; brakes only supplement engine braking, applied in snubs.

Using the proper braking technique, after braking you release the brakes when your speed is about:

Answer: 5 mph below your safe speed — Brake to feel a slowdown, then release at about 5 mph below your safe speed (a roughly 3-second application), and repeat.

Brake fade is caused mainly by:

Answer: Excessive heat from overusing the brakes — Excess heat changes the linings and expands the drums, reducing braking; rely on engine braking to avoid it.

Common mistakes on the Air Brakes test

  • Mixing up the pressure numbers — cut-out (~125 psi), cut-in (~100 psi), low-air warning (~60 psi) are all tested
  • Confusing spring brakes (parking/emergency) with service brakes — which system does what, and when
  • Forgetting the air-leak rate limits for the applied and released tests during inspection
  • Assuming ABS changes how you brake — the test wants normal braking with ABS, not pumping

Studying with the full Truckcess course does double duty: the theory counts toward the federal ELDT requirement (Truckcess is listed on the FMCSA Training Provider Registry).

Official source: New Hampshire Division of Motor Vehicles

CDL licensing in New Hampshire is administered by the New Hampshire Division of Motor Vehicles. Fees, scheduling, forms, and the official New Hampshire CDL manual live on the official site: NH DMV — official CDL page (verified 2026-08-09).

Truckcess is not affiliated with or endorsed by the New Hampshire Division of Motor Vehicles. Our practice tests cover the federal CDL knowledge standards (49 CFR Part 383) that every state exam is built on; exact question counts, fees, and procedures vary by state and change over time — the official site is always the authority.

More New Hampshire practice tests

Full prep courses are one-time from $59 with 12 months of access — mytruckcess.com/cdl.

CDL practice tests by state · Meet the Course Director · The completion certificate